Airbus TW1m, Инструкция по эксплуатации

Страница: 24 / 28

P R O G R A M M I N G
PS11730AENAD01 TW1m - Instruction Manual
24/27
This document is the property of Airbus DS SLC and should not be copied or circulated without permission.

Configuring TW1m
In some cases it is possible that Transmit Inhibit is active after the terminal has been programmed by using Taqto.
This can be avoided by not using the
NORMAL_NO_SERVICE
mode in the Terminal mode settings.
Note that there is one set of settings that is common for Taqto, and it is possible to override them for each
connection.
It is recommended to keep the default values for the common settings (see Figure 14) and then adjust the settings
for the connection to which TW1m is configured (see Figure 15 for an example).
Figure 14 Device configuration: Default values of the common settings