AirBench VertEx VA, Эксплуатация и обслуживание

Страница: 5 / 20

© Copyright AirBench Ltd 2016 Page 5 of 20
INSTALLATION
General
Unpack the unit and check for damage, if not already completed.
The VertEx must be installed on a flat and level floor capable of carrying the weight of the unit. For nominal unit
weights, see Specifications section at rear of manual. When determining an installation location, be aware that
the air exhaust must discharge somewhere. Do not position the unit so all outlets are blocked.
These models are designed to be moved into place using a forklift or pallet truck, taking care not to damage
fittings on the base of the unit.
Please note installation may be required when using certain accessories, external fansets, or ducting (see
below).
Modular System
VertEx units are built as modular systems. For ease of shipping and installation, the top section may be shipped
separately. The top section is fitted with forklift eyes to enable positioning; note that these eyes are not
designed to lift the complete VertEx unit.
If using a forklift to position the top section on the base section, always ensure operators are fully trained and
that other users are outside the working zone of the forklift. Once loosely positioned, ensure mounting holes are
aligned and seal tape is not disturbed; then bolt top section into position.
Do not move the unit while the top section is not securely fastened.
If in doubt, contact us for advice.
Electrical
WIRING
VertEx is supplied as standard with an internal fan or fans. These are pre-wired to a switch or speed controller
and fitted with a lead and plug for your convenience. Standard electrical supply is 240V/1Ph/50Hz. Certain
models can be supplied with 110V/1Ph/50Hz internal fans if specified in advance; this is noted on the front left
of each unit where applicable.
BS7671 requires that the lead is appropriate for the working environment and you must satisfy yourself that the
pre fitted lead is satisfactory.
VertEx can be supplied configured for multi-unit installations. In this instance a single electrical panel with
plugged connections will be provided.
EARTH BONDING
If in doubt consult a qualified electrician.