AirBench VertEx VA, Эксплуатация и обслуживание

Страница: 10 / 20

© Copyright AirBench Ltd 2016 Page 10 of 20
MAINTENANCE
Filter care
The filters are not self-cleaning and must be maintained / cleaned / replaced as described below. Proper filter
care is essential for the effective operation of your VertEx. If in doubt, contact the manufacturer for advice.
When changing filters, the seals on which the filters sit should be checked for damage and replaced if
necessary.
All filters should be regularly checked for wear, damage, or by-passing.
When completing filter maintenance activities these should be recorded in the accompanying log sheet.
Take precautions and wear appropriate PPE when handing filters.
They may contain hazardous dusts.
i
If using a vacuum cleaner to empty filters, excessive cleaning will reduce filter life.
Remove excess dust only.
FILTER ACCESS
The filters are held into position by clamping bars mounted to the rear of each door.
To open the door, use a screwdriver to turn the quarter turn latches towards the centre of the unit. Do not
release the final latch without supporting the door.
Lift the door upwards out of the locating pins, and place to one side.
Filters can then be removed in order. When replacing filters, they should be installed in the order in which they
were fitted; which is detailed in the Commissioning Certificate.