Air RADOME A/C, Инструкция по установке, эксплуатации и обслуживанию

Страница: 7 / 28

3
PASSPORT I/O CONTROL
POWER BUTTON:
Press and release to turn unit on and off.
NOTE: To “press and release” a button, press and hold for one second and then release.
FAN BUTTON:
NOT USED ON RADOME A/C.
UP & DOWN BUTTONS: Press and hold either button until desired temperature (set point) is displayed.
Press either button momentarily to show current set point. Radome a/c set point is 85ºF.
COOL LED: Lights when the compressor is running in cool mode or in automatic mode while cooling.
FAN LED: NOT USED ON RADOME A/C.
HEAT LED: NOT USED ON RADOME A/C.
DISPLAY WINDOW:
Shows current temperature. Also used in viewing and setting program parameters.
AIR SENSOR: Dome temperature is detected by the face plate air sensor, located in the bottom edge of
the display.
BLANK DISPLAY FOR NIGHT TIME OPERATION: Press the FAN and DOWN buttons
simultaneously to blank the display for night time operation. The appropriate LEDs will remain lit during
cooling and heating. When the desired temperature has been achieved, the middle segment of the display
window will remain lit to indicate that the system is on. Press any button to return to normal display mode.