Air 586MI, Руководство пользователя

Страница: 21 / 38

EQUIPMENT REQUIRED
The dimension of the 586MI system board is designed to fit perfectly in a PC/XT (or PC/AT) standard case. To build a
complete high performance system based on the 586MI system board, the following equipment are needed:
A chassis with dimension similar to PC/XT/AT standard chassis.
A standard AT 220W power supply which is capable to provide a continuous power within a +4.85 VDC to +5.25 VDC
range. A power line filter may be needed for areas with noisy transmission.
A 2-inch, 8-Ohm speaker to provide sound capability.
A 2-position switch with a 2-pin connector for speed function.
A push button switch with 2-pin connector for reset function.
One floppy drive (360K or 1.2M or 1.44M).
Hard disk drive.
A set of flat cables for floppy drive and hard disk drive.
A VL-Bus video card (Monochrome, CGA, EGA, VGA).
A set of flat cables for floppy drive and hard disk drive.
An AT-compatible keyboard (84 or 101 Keyboard) with cable.
A video display monitor.
Following additional equipment will be useful to enhance the system:
A bus or serial mouse.
A tape pack up drive.
586MI System Board User's Manual Page 21