Air 586MI, Руководство пользователя

Страница: 19 / 38

INSTALLING A VL-BUS CARD
Carefully follow these steps to install a VL-Bus card:
1. Turn off your computer and unplug the power cord.
2. Turn off the power to all peripheral devices, such as your printer.
3. Disconnect the cables from the back of the system in order to give more room to work. Note how all cables are
connected prior to disconnection.
4. Remove the computer's cover.
5. Choose an unused VL-Bus slot.
6. Setting the VL-Bus card according to its user's manual.
7. Holding the card at the center of the top edge, gently push straight down with equal pressure at both ends.
8. Replace the screw to hold the card into place.
9. Replace and secure the system cover.
10.Reconnect all the wires and cables.
INSTALLING EXTERNAL I/O CARD
The BIOS on 586MI automatically detects external I/O devices. It will arrange the on-board I/O addresses accordingly to
prevent any address conflict.
Serial Ports:
The on-board Serial port 1 (labeled as COM1) address can be set to 3F8(COM1), 3E8(COM3), or Disabled.
The on-board Serial port 2 (labeled as COM2) address can be set to 2F8(COM2), 2E8(COM4), or Disabled.
The 586MI BIOS can detect external Serial port addresses and sets different addresses for the on-board Serial ports or
disables them entirely. User's responsibility is to select the Serial port addresses on the external I/O card. There are no
jumpers on 586MI to be changed.
Parallel Ports:
The on-board Parallel port (labeled as PARALL) address can be set to 378(LPT1), 278(LPT2), or Disabled.
586MI System Board User's Manual Page 19