26
Selecting Your pH Preset & Dispensing Water:
A. Once properly installed and
plugged in with water flowing to
the unit, your water ionizer will
enter standby mode displaying
the most recently selected
preset, e.g., Daily Drinking.
B. To change to a different preset,
a) press the Alkalinity button to
cycle through each of the 4
alkaline water settings. Each
press advances you to the next
alkaline preset... Cooking –
Make Tea & Neutralize Liquor –
Daily Drinking – Initial Drinking;
b) press the Purified button to
select filtered but nonionized
water; and c) press the Acidity
button to cycle back and forth
between the 2 acidic water
presets... Cosmetic – Cleaning.
C. After making your water selection, turn on your water faucet, flip
the attached Faucet Diverter Valve to the on position diverting
water to the water ionizer which will then begin dispensing water
matching the pH preset selection.
D. Once you’re done dispensing water simply shut off your faucet
and/or the attached Faucet Diverter Valve.
Automatic Cleaning Function
A. Whenever the water ionizer is in any of the 4 alkaline modes or
either of the 2 acidic modes, ending water flow to the unit by turning
off the faucet or Faucet Diverter Valve will cause your water ionizer
to reverse electroplate polarity, thus initiating the automatic
cleaning process.
B. Auto-cleaning is NOT triggered if the last function prior to shutting
off water flow to the unit was Purified water mode. The unit’s
electroplates are not engaged as part of the Purified Water
process, consequently, there is no need for auto-cleaning the
electroplates after using this function.
Owner’s Manual: AirWaterLife.com Aqua-Ionizer Deluxe 9.0
