D. Insert the Plastic Expansion Screw Anchors into the two holes as
shown in Fig. C below. Ensure the anchors are flush with the wall
when fully inserted as shown in Fig. D below.
E. Screw provided Stainless Steel Screws
into Plastic Expansion Screw Anchors
you’ve just seated in the two drilled holes.
Leave approximately 3/16 inches (5mm)
of the screw head exposed from which to
hang the water ionizer as shown in Fig E.
F. As shown in Fig F below, affix your water ionizer to the wall by
slipping the screw notches in the back of the unit over the exposed
portion of the Stainless Steel Screw heads and pushing down gently
to be sure the screws lock properly into place securely anchoring the
unit to the wall.
Fig. D
Fig. C
Fig. F
3/16 inches
(5mm)
Fig. E
20
Owner’s Manual: AirWaterLife.com Aqua-Ionizer Deluxe 9.0
