Air-Vac PCBRM15, Руководство пользователя

Страница: 75 / 120

Pcbrm15 & PCBRM System 5.2 User’s Manual Chapter 5: Maintenance/Parts
Part No. 4005.00.906
5-7
5.3.1 Replacement of Pump Bearings:
•
Follow all the steps outlined in Pump Disassembly.
•
After Impeller and Shaft Assembly are removed, the Impeller Pulley, Bearing Spacer, and
Lower Bearing can be removed.
•
Remove Bearing Retainer Hex Screw and Washer, allowing removal of Upper Bearing.
•
Use graphite lubricant on screws.
5.3.2 Replacement of Drive Belt (A):
•
Disconnect electrical power.
•
Remove Rear Cover Screws (4).
•
Remove Flow Well (B) & Pot Cover (C).
•
Remove Belt Guard Hex Screws (2) and Belt Guard (D).
•
Loosen Screws (4) holding Motor (E). Slide motor as high as possible.
•
Remove Drive Belt (A).
•
Replace Drive Belt and reassemble.
(D)
(A)
(E)
(B)
(C)
(E)