manualshive.com logo in svg

Air Monitor ELECTRA-flo G5, Инструкция по установке, эксплуатации и обслуживанию

Поделиться
Скачать
Air Monitor ELECTRA-flo G5 Скачать руководство пользователя страница 9

1050 Hopper Ave, Santa Rosa, CA 95403  • Tel (800) AIRFLOW • www.airmonitor.com [email protected] 

ELECTRA-flo G5 Transmitter Thermal Airflow & Temperature Measurement System  1015-3 - 07/18

9

3.6   CONFIGURATION

The default display settings for 
the ELECTRA-flo G5

The display pages for the optional true dual channel version of 
the meter. The UP arrow key is used to toggle between the pages.

All device configuration is done using the four button membrane keypad on the transmitter cover. 
Individual key functions depend on specific menu selection. The basic key functions include: 

ENT:

 Enters menu item from main or service menu; moves cursor to next item below when in 

sub-menu

ESC:

 Exits current page or sub-menu item

UP Arrow: 

Toggles between display pages on dual channel meters. In the menu mode, it moves 

cursor “up” through main and service menus and changes character in sub-menu items.

DOWN Arrow:

 Moves cursor “down” through main and service menu; changes character in 

sub-menu items

MAIN MENU OR SERVICE MENU:

  

ENT

 opens the highlighted sub-menu. 

UP

 and 

DOWN

 move the 

selection cursor between sub-menus. 

Sub-menu:

  

ENT

 moves selection cursor to the next item. 

UP

 and 

DOWN

 change state of item or 

change characters in writable fields.

MAIN MENU

MAIN MENU SELECTION

DESCRIPTION

Density Compensation

Select density compensation type for flow output (Actual or Standard CFM)

Select System of Units

Select system of units (US or SI)

Select Units of Measure

Select velocity and flow units

Flow Configuration

Select and configure flow and application parameter (ducted or fan inlet, duct 

size, fan inlet diameter, etc.)

Display Configuration

Set brightness and inactivity timeout interval

Analog Output Configuration

Configure analog output type, value and averaging filter

Display Averaging Filter

Configure display averaging filter

Zero Lockdown

Adjust zero lockdown (below a FPM set point, drives display and output to zero)

Alarm/Alert Configuration

Configure alarm type, upper and lower limits

Field Characterization

For information on field characterization, please see page 19 below

Содержание ELECTRA-flo G5



























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды