Air Monitor ELECTRA-flo G5 Скачать руководство пользователя страница 26

1050 Hopper Ave, Santa Rosa, CA 95403  • Tel (800) AIRFLOW • www.airmonitor.com [email protected] 

ELECTRA-flo G5 Transmitter Thermal Airflow & Temperature Measurement System  1015-3 - 07/18

26

SECTION 5.0:  WARRANTY INFORMATION

Air Monitor Corporation (hereinafter referred to as “Seller”) warrants that at the time of shipment, 
products sold pursuant to this contract will be free from defects in materials and workmanship and 
will conform to the specifications furnished or approved in writing by Seller. No warranty is given 
that delivered products will conform to catalog sheets, data sheets, and the like, which are subject to 
change without notice. 

Seller will repair or replace, at its option, any product listed under this warranty which is returned 
freight prepaid to Seller within three (3) years after start-up or thirty-nine (39) months after shipment, 
whichever comes first, that upon test and examination, proves defective within the terms of this 
warranty. The warranty period for the ELECTRA-flo system repaired or replaced shall be for the 
time remaining on the warranty period of the original components.  Purchaser shall notify Seller in 
writing of such defect within sixty (60) days of discovery of the defect. 

This warranty does not extend to any product sold by Seller which has been the subject of misuse, 
neglect, accident, damage or malfunction caused by interconnection with equipment manufactured 
by others, improper installation or storage, or used in violation of instructions furnished by Seller, 
nor does it extend to any product which has been repaired or altered by persons not expressly 
approved by Seller. Nor does Seller warrant equipment against normal deterioration due to 
environment; nor items such as lamps, glass, and similar items subject to wear or burnout through 
usage. Adjustments for items or equipment not manufactured by Seller shall be made to the extent of 
any warranty of the manufacturer or supplier thereof. 

Seller shall not be liable for any special or consequential damages or for loss of damage, directly or 
indirectly arising from the use of the products. Seller’s warranty shall be limited to replacement of 
defective equipment and shall not include field removal and installation expenses. 

The warranty set forth above is in lieu of all other warranties either express or implied and 
constitutes the full extent of Air Monitor Corporation’s liability to the customer, or any other party, 
for breach of warranty. 

THERE ARE NO EXPRESS WARRANTIES EXCEPT AS SET FORTH HEREIN AND THERE ARE NO 
IMPLIED WARRANTIES OF MERCHANTABILITY OF FITNESS FOR ANY PARTICULAR PURPOSE, 
WHICH ARE PARTICULARLY DISCLAIMED. 

Copyright © 2016 Air Monitor Corporation. All printed material should not be changed or altered 
without permission of Air Monitor Corporation. Any published technical data and instructions are 
subject to change without notice. Contact your Air Monitor Corporation representative for current 
technical data and instructions. All brand names, trademarks and registered trademarks are the 
property of their respective owners. Information contained within this document is subject to change 
without notice. Visit www.airmonitor.com to view and/or download the most recent version of this 
and other documents.

Содержание ELECTRA-flo G5



























Отзывы: