5
5
High Power Outdoor Solution
Model:
WH-5400CPE
English
To remove outdoor cable from WH-5400CPE, you need to use flat
screw driver. Unscrew splash prove guard from CPE. Insert the screw
driver to inner hole and release the clever. See graphic below.
Unplug Ethernet Cable from 5400CPE
Troubleshooting
If CPE gets the IP address from DHCP, or you cannot find the AP at its
default IP address, use
Locator
to find CPE.
Locator
is in
Setup CD
under directory
\utility.
Run
setup.exe
to install
Locator
.
Locator
can even find CPE under different subnet, but cannot manage
it. To manage CPE, both CPE and
Locator
(your PC) need to be in the
same subnet and Ethernet segment.
If still cannot find AP, please check the following:
1
1
.
.
Power adapter and DC-Injector if the lights are on. Make sure
they are with power.
2
2
.
.
Make sure the outdoor cable is of full-wired 4 pairs.
3
3
.
.
Verify the correctness of the connections. “To outdoor” port
needs to be connected to CPE.
4
4
.
.
Close and re-load Locator and search CPE again.
English
