3
3
High Power Outdoor Solution
Model:
WH-5400CPE
English
Installation Steps
(cont’d)
The AP’s default IP address is 192.168.1.20. Please make sure
your computer IP is in the same subnet as the AP (i.e.
192.168.1.x)
Open the web browser and enter 192.168.1.20.
Wireless
:
Basic Setting
This page includes all primary and major parameters. Any parameter
change will need the device to reboot for the new settings to take effect.
Mode:
This Wireless Access Point may have several wireless modes.
However, due to WH-5400CPE built-in directional patch antenna,
repeater mode and WDS do not apply. Please do not use this mode
and option. Change mode in System Configuration – System
Properties.
English
