Air Lift Air Lift 1000 60815, Руководство по установке

Страница: 10 / 16

8
MN-692
air lift 1000
Minimum Air Pressure Maximum Air Pressure
5 PSI 35 PSI
FAILURE TO MAINTAIN CORRECT MINIMUM PRESSURE (OR PRESSURE
PROPORTIONAL TO LOAD), BOTTOMING OUT, OVER-ExTENSION OR RUBBING
AGAINST ANOTHER COMPONENT WILL VOID THE WARRANTY.
Maintenance and servicing
MAINTENANCE GUIDELINES
By following these steps, vehicle owners will obtain the longest life and best results from
their air springs.
1. Check the air pressure weekly.
2. Always maintain at least the recommended minimum air pressure to prevent the air
spring from being pinched. Never inflate beyond the maximum air pressure.
4. If you develop an air leak in the system, use a soapy water solution of 1/5 liquid dish
soap and 4/5 water to check all air line connections and the inflation valve core before
deflating and removing the air spring.
5. Always add air to springs in small quantities, checking the pressure frequently. Sleeves
require less air volume than a tire and inflate quickly.
OPERATING TIPS
1. Inflate your air springs to 35 PSI before adding the payload. This will allow the air cylinder
to properly mesh with the coil spring. After the vehicle is loaded, adjust your air pressure
down to level the vehicle and for ride comfort.
2. When carrying a payload it will be helpful to increase the tire inflation pressure in
proportion to any overload condition. We recommend a 2 PSI increase above normal
for each 100 lbs additional load on the axle.
DO NOT ExCEED THE VEHICLE MANUFACTURERS’ MAxIMUM GROSS VECHICLE
WEIGHT RATING.
CAUTION