Air Lift 75687, Руководство по установке

Страница: 9 / 16

7
MN-717
Air Lift Performance
ALIGNING THE VEHICLE
1. Using the control system, set the vehicle height to the new custom ride height.
2. If the new custom ride height is lower than stock, we recommend loosening all pivot
points (bolts, nuts) on any control arm, strut arm or radius rod that contains bushings.
Once they have been loosened, re-torque to stock specifications (fig. 6).
It may be necessary to cycle the suspension to loosen the bushing up from its mount. This
will help re-orient the bushing at its new position based on the custom ride height.
NOTE
Description Nm ft ./lbs . inch/lbs .
Upper Mount Nuts (3 per side) 80 59
Stabilizer Link 44 32
Skid Control Bracket 5 44
Shock Eye Bolt 140 103
Suspension Arm Bushing (3 bolts per side) 65 48
fig. 6
fig. 5