8
MN-717
Air Lift Performance
1. Some struts for this vehicle come with a nine-position damping dial for added adjustability
(fig. 7). If not, proceed to 2.
Before driving your vehicle, set the new struts to their highest setting by turning the black
dial on the shaft of the strut as far as it will go to the right (position 9).
2. Next, completely deflate and reinflate the air bags 2-3 times. This procedure will purge
any trapped air in the dampers and allow for maximum performance. For ride performance
and the most versatility, Air Lift recommends setting the strut dial (if equipped) to position
6 or higher.
MAKE SURE THE FRONT WHEELS ARE STRAIGHT WHEN DEFLATING AND
REINFLATING AIR BAGS.
3. Inflate and deflate the system (do not exceed 125 PSI) to check for clearance or binding
issues. With the air springs deflated, check clearances on everything so as not to pinch
brake lines, vent tubes, etc. Clear lines if necessary.
4. Inflate the air springs to 75 PSI - 90 PSI and check all connections for leaks.
5. An Air Lift air management system such as 3H/3P is highly recommended for this
product.
6. Please continue by reading the Product Use, Maintenance and Servicing section.
fig. 7
Increase damping
(stiffer ride)
Decrease damping
(softer ride)
Before Operating
CAUTION
Содержание 75687
Страница 2: ......