Air innovations WINE GUARDIAN DS025, Инструкция по установке, эксплуатации и обслуживанию, Страница: 47 / 61

47
! WARNING !
If multiple units are installed close to each other, make sure
the radio is turned off (setting 31)
Low humidity alarm
Flashing humidity
number
Flashing humidity number along with (!)
symbol will remain on screen until
humidity rises above the Low Humidity
Alarm set point (Setting 4).
!1 = High Pressure
Switch Fault THIS ALARM FORCES THE SYSTEM
TO SHUT DOWN
(!1) will remain on screen until the High
Pressure reset switch has been reset.
See the trouble shooting guide page 61
for “Instructions to Reset High Pressure
Switch”.
!2 = CS (Condensate
Switch Fault) THIS ALARM FORCES THE SYSTEM
TO SHUT DOWN
(!2) will remain on screen until the CS
(condensate switch) fault is resolved
and reset.
!3 = Defrost Sensor
Fault THE SYSTEM REMAINS
OPERATIONAL DURING THIS
ALARM
Defrost sensor has been shorted,
disconnected or open.
(!3) will remain on screen until the
defrost sensor issue has been resolved.
!4 = Communication
loss THE SYSTEM REMAINS
OPERATIONAL DURING THIS
ALARM
Bad or no data transfer between
sensing device and main control board.
“!4” will remain on screen until
communication is re-established.