Air innovations HEPAir 24S050, Инструкция по установке, эксплуатации и обслуживанию, Страница: 23 / 51

23
•
All supports for the unit must be designed to meet applicable local codes and
ordinances.
•
Do no t remove access panels until fan impellers have completely stopped. Pressure
developed by moving impellers can cause excessive force against the access panels.
•
Fan impellers continue to turn (free-wheel) after the power is shut off.
CAUTION
•
Clean only with a dry cloth .
•
Never pressurize equipment above specified test pressure. See HEPAir Specification
Sheet
•
Do not use the HEPAir near water.
•
Do not block any supply or return air register or duct. Install in accordance with the
instructions in the HEPAir Manual. Do not defeat the safety purpose of the polarized
or grounding type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete outlet.
•
Protect the power cord from being walked on or pinched, particularly at the outlet
plugs, convenience receptacles, and the point where it exits the unit.
•
Only use attachments/accessories specified by the manufacturer.
•
Always operate this equipment from a 120 or 208/230 VAC, 1 phase, and 60Hz power
sources only or 230 VAC, 1 phase 50Hz power sources only
•
Always ground the outlet to provide adequate protection against voltage surges and
built-up static charges.
•
Refer all servicing to qualified service personnel. Servicing is required when the
unit has been damaged in any way such as:
✓
The power supply cord or plug (if supplied) is damaged.
✓
Liquid has been spilled or objects have fallen into the unit.
✓
The unit has been exposed to rain or moisture.
✓
The unit does not operate normally.
✓
The unit has been dropped.