16
17
Installation
(Continued)
5. Insert Haven Plus unit into the duct.
Insert the unit (mounting base attached to metal filter housing)
into the duct opening and attach it to the duct (or mounting
plate) with the four included sheet metal screws. (Figures 13-14)
NOTE:
The Haven Plus model is configured for upward or horizontal air
flow direction as shipped. If the direction of airflow in the duct is
downward, the metal filter housing of the unit must be rotated, so that
airflow matches
Figure 10
. Reference
steps 4A & 4B
.
6. Install UVC lamp into ballast.
Wearing gloves, plug the base of the UVC lamp into the ballast
assembly lamp socket. (See Figure 15)
7. Wipe off UVC lamp with alcohol wipe.
Wipe off the lamp glass with the supplied alcohol wipe.
8. Insert the UVC lamp and ballast into the mounting
base hole.
Insert the UVC lamp through the center hole of the mounting
base. (See Figure 16) The power cord must be 90° to the view
port hole on the mounting base. (See Figure 17)
INSTALLATION
VIEW PORT
CORD
FIGURE 15
VIEW PORT
CORD
VIEW PORT
CORD
VIEW PORT
CORD
VIEW PORT
CORD
FIGURE 16
FIGURE 13
FIGURE 14
FIGURE 17
WARNING: NEVER EXPOSE EYES OR SKIN TO UVC LIGHT FROM ANY SOURCE. LOOKING
DIRECTLY AT THE UVC LIGHT MAY CAUSE PERMANENT EYE DAMAGE OR BLINDNESS.
NEVER OPERATE THE AIR+HEALTH™ AIR PURIFYING SYSTEM OUT OF THE PLENUM.
AVOID TOUCHING THE GLASS PORTION OF THE LAMP WITH YOUR HANDS.
