background image

8

9

Select a Location

CAUTION

Investigate and determine the location of the AC coil prior to drilling holes in 
duct for mounting unit. Use care to avoid damage to the coil and any wiring 
or other components while installing the Haven Plus unit.

WARNING

To prevent water damage or electric shock, do NOT mount unit under 
a humidifier.

1. Determine the air flow direction.

Now that you have located your air handler and where the HVAC 
system is in your home, it is time to choose an install location. 
Choosing the best location is dependent on what layout the 
HVAC system has; Down Flow, Up Flow, or Horizontal Flow.
(Reference Figure B to see which layout matches your HVAC.)

2. Choose a suitable location for the unit.

Possible locations are downstream from the ‘A’ coil (Air 
Conditioning Coil) in the supply plenum OR in the return plenum; 
preferably downstream from the air filter. 
For optimum “cleaning” effect on the ‘A’ coil, mount the unit in the 
supply plenum as close as possible to the ‘A’ coil.
(Reference Figure B to pick the best install location for your 
system’s air flow direction.)

NOTE:

 SEAL the joints and seams of the plenum near the mounting location 

to reduce any direct viewing of UV light.

SELECT A LOCATION

AIR FLO

W

AIR FLO

W

AIR FLO

W

AIR FLOW

Furnace or
Air Handler

Furnace or
Air Handler

Furance or
Air Handler

P/N 46452800 07/03

A C

oil

A Coil

HORIZONTAL  FLOW

Supply

Air Plenum

Floor

Return

Air Plenum

Air+Health™

Best Location

Air+Health

TM

Optional Location

Return

Air Plenum

Supply

Air Plenum

AIR

 F

LO

W

Furnace or 

Air Handler

A Coil

Supply

Air Plenum

Re

turn

A

ir P

len

um

AIR

 F

LO

W

A Coil

DO NOT mount near a 

return air register grill

These units are mounted in attics or crawl spaces.

Only

Location

Supply

Air Plenum

Re

turn R

egist

er

 G

rill

W

all

AIR

 F

LO

W

AIR  FLOW

DOWN FLOW

UP FLOW

Furnace or 

Air Handler

Furnace or 

Air Handler

WARNING: NEVER EXPOSE EYES OR SKIN TO UVC LIGHT FROM ANY SOURCE. LOOKING 
DIRECTLY AT THE UVC LIGHT MAY CAUSE PERMANENT EYE DAMAGE OR BLINDNESS. 
NEVER OPERATE THE AIR+HEALTH™ AIR PURIFYING SYSTEM OUT OF THE PLENUM. 
AVOID TOUCHING THE GLASS PORTION OF THE LAMP WITH YOUR HANDS.

FIGURE B

Содержание Haven Plus


















Отзывы: