Page 24 of 26
(Vers.12.17.2018)
S
-
100 Refractory Walled Air Curtain Burner with HATZ 3H50TIC Diesel Engine
OPERATING MANUAL
THERMO
-
CERAMIC PATCHING COMPOUND
For minor repair of S
-
Series refractory panels and doors.
Air Burners Part # 6900
-
1003
Thermo
-
Ceramic Wet Pre
-
Mix
NOTE: This is an air cured product. Reseal unused portion immediately.
Once opened the shelf life is one (1) year.
Directions:
1)
Cracking of the panels is normal as they flex in the heat. Filling the cracks
every 6 months or as needed will extend the life of your Thermo
-
Ceramic
Panels.
2)
Air Burners patching compound is pre
-
mixed and ready to use (may require
some stirring).
3)
Storage: Compound should be stored indoors in a frost
-
free location.
4)
Preparation: the area in and around the damaged area to be patched must
be cleaned and brushed to provide the best surface for the compound to ad-
here. Remove all loose refractory and debris from the area to be patched.
5)
Wet the cleaned surface with a light spray or damp cloth.
6)
Installation: Using a trowel or similar tool, pack the refractory compound ma-
terial into cracks and into areas where the refractory is missing. To achieve
proper thickness, trim off the excess material using a sharp, flat blade or the
side of the trowel.
7)
Allow the material to harden overnight before placing the FireBox back into
service. After the compound has hardened, operate the FireBox under nor-
mal conditions.
Contact Air Burners, Inc., should you require assistance with
this maintenance tasks. Send Email to [email protected],
call 772
-
220
-
7303 or 888
-
566
-
3900
(Customer Support)