air
avionics
9. Maintenance
5. Update required documentation.
9.1.3 Special Update Instructions from Version 1.3 to 1.5
The update to version 1.5 requires a two step process including an update of the ATD
‘‘bootloader’’. A bootloader is the piece of software that handles the update process on the
device.
A stable power supply is required for bootloader updates. Never disconnect power
during the process. This might damage the device beyond repair.
1. Ensure software version 1.3 is installed. Update any earlier versions to 1.3.
2. Load bootloader update file (AD57BL_VER_1_7.abl) onto an empty microSD card.
3. Insert the microSD card into the unit.
4. Power the unit on. In the
CONFIGURATION MENU
, please navigate to
DEVICE
→
INFO
→
HW AND BL
→
UPDATE BOOTLOADER
.
5. Turn the inner knob to start the update process.
6. Once the update process has been completed, perform software update to version
1.5 or later normally (as described above).
Please make sure that alwas only one update file is present on the microSD card at a
time. Multiple files on the microSD card will cause the device to not update properly.
9.1.4 Special Update Instructions from Version 1.5 or 1.7 to 1.8 or later
The update to version 1.8 requires a two step process including an update of the ATD
‘‘bootloader’’. A bootloader is the piece of software that handles the update process on the
device.
A stable power supply is required for bootloader updates. Never disconnect power
during the process. This might damage the device beyond repair.
1. Ensure software version 1.7 is installed. Update any earlier versions to 1.7.
2. Load bootloader update file (AD57BL_VER_2_6.abl) onto an empty microSD card.
3. Insert the microSD card into the unit.
4. Power the unit on. In the
CONFIGURATION MENU
, please navigate to
DEVICE
→
INFO
→
HW AND BL
→
UPDATE BOOTLOADER
.
5. Turn the inner knob to start the update process.
6. Once the update process has been completed, perform software update to version
1.8 or later normally (as described above).
Please make sure that alwas only one update file is present on the microSD card at a
time. Multiple files on the microSD card will cause the device to not update properly.
ATD
·
Installation Manual
·
rev. 3.0
·
2019/05/09
35
