Aiqidi Smarine AiF5PS Скачать руководство пользователя страница 70

Страница: 70 / 116

Fuel tank capacity (built in type):

1.1L (0.29 US gal,0.24 Imp.gal)

3.Toghten the fuel tank cap securely.

4.Wipe up any spilled gasoline immediately with dry rags.Dispose of rags properly

according to local laws or regulations.If you use a portable container to store and dispense

fuel,only use a locally approved GASOLINE container.

Filling fuel for portable fuel tank (optional)

1. Disconnect the fuel hose from the fuel joint on the outboard motor,and then install the

fuel joint cap.

WARNING! When not using a portable fuel tank,make sure to install

the fuel joint cap. Otherwise,injury could result from striking the fuel joint

accidentally.

1.Fuel hose

2.Fuel joint cap

．

Remove the portable fuel tank from the boat.

．

Remove the fuel tank cap.

1.Fuel tank cap

．

Fill the fuel tank,but do not overfill it.

WARNING!

Do not overfill.Otherwise fuel can expand and overflow if the temperature

Содержание Smarine AiF5PS





















































































































Результаты поиска

Содержание Smarine AiF5PS

Отзывы:

Бренды по названию

Популярные бренды

Aiqidi Smarine AiF5PS, Руководство пользователя

Результаты поиска

Содержание Smarine AiF5PS

Отзывы:

Бренды по названию

Популярные бренды