20 |
P a g e
R5 Analog Keyboard User’s Guide
Activation Point Control
First Activation Point
–
In F5 mode you can set the activation point of the 12
analog keys. By default the activation point is at the very top of the key press. To
make the activation at a lower point in the
key press you can press FN + “PGDN“.
To set it at a higher acti
vation point you can use FN + “PGUP”.
Second Activation Point
– In F5 mode you can send a second keystroke using a
single key. This can be enabled/disabled per each QWERASDF analog key. To
enable/disable this feature simply press FN and the corresponding analog key you
want to enable/disable the second activation point for. For example, if you wanted
to enable the secondary acti
vation point under just the “R” key you would press
FN+R and the LEDs will turn green letting you know it has been enabled. If you
wish to enable it for other keys press FN and then each key you wish to enable the
feature for. The activation point of this second press is selected using the FN +
“INS“ to increase the activation point and FN + “DEL” to decrease the activation
point. It is not possible to set the activation point of the second key press higher
than the activation point of the first and the keyboard will prevent you from doing so.
C
urrently the “Q”, “W”, “E”, “R” keys will use “U”, “I”, “O”, “P” as the secondary press
and “A”, “S”, “D”, “F” will use “J”, “K”, “L”, “;” as the secondary press.
