Aimco UBX-T Series, Руководство пользователя

Страница: 15 / 24

15
Incomplete Job Detection (Premature Trigger Off)
UBX-T displays an incomplete job error if the tool is switched off
before automatic shut-off.
1. Squeeze trigger of UBX, and the LED will light orange. Release
the trigger before automatic shut-off, and the LED will light red
about 3 sec. and go out.
2. The LED lights green with 1 pulse buzzer sounding for automatic
shut-off. Retry until automatic shut-off comes if incomplete job
was detected.
1 Set DIP switch to OFF, opening screws and removing rear
cover if it is not necessary to make buzzer sound.
2 The LED lights orange instead of green for OK judgment
due to retrial repairing the previous NOK result with LED
lighting red about 3 sec.
DIP
Switch
LED
Tube
Circuit Board
Screw
Screw
Rear Cover
Premature Trigger Off Automatic Shut Off
Timing Chart