PB-1000 PANEL BEATER
TM
PRODUCT MANUAL
PAGE 4
When operating this equipment, follow basic precautions, including the following:
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions before using this machine and its attachments. Use this equipment
only for its intended use.
Contact Factory Authorized Service Personnel for all repairs or service to unit.
Do not operate equipment unless all enclosure panels are properly in place.
Before using this equipment consult your physician if you have a pacemaker or similar
device
WARNING! Risk for electrical shock. Unplug the welder from the wall outlet before ser-
vicing, cleaning, or maintenance.
WARNING! All electrical connections must be made by a qualified electrician. Risk for
electrical shock.
Do not touch the copper connectors or electrodes during or immediately after use,
these components will be HOT!
WARNING! Make sure to use proper PPE when operating. Sparks and debris might
injure the eyes.
WARNING! Sparks could start a fire. Risk for injuries.
WARNING! Always wear protective face shield and gloves when working with batter-
ies.
IMPORTANT! The tool may only be used by qualified personnel. Failure to take basic
safety precautions can result in serious injury or material loss.
WARNING! Risk for damage to property in the vicinity of operation: Take proper pre-
cautions.
WARNING! Follow battery manufacturer’s recommendations for Battery service and
maintenance.
WARNING! Make sure to use proper eye protection when operating.
WARNING! Select the location for the Panel Beater™ carefully to maintain stability,
otherwise the unit might tip causing personal injuries or serious damage to the Panel
Beater™. Maintain machine in upright position.
