PB-1000 PANEL BEATER
TM
PRODUCT MANUAL
PAGE 10
OPERATING
INSTRUCTIONS
ATTACHING ELECTRODES
Attach an electrode onto the electrode holder by first screwing a lock nut (provided) onto the electrode and then
screwing the electrode into the end of the electrode holder. Tighten the nut against the electrode holder to pre-
vent loosening.
AIM CONTROL HANDLE
The key component of your AIM Dent Puller is the Control Handle. In operating the machine you will weld the
electrode to the dented metal and pull out the dent as described in the following instructions. You can also shrink
bulges and dimples by using the shrink tool at the center of the Control Handle.
Control Switch
Control Handle
Control Cable
Shrink
Tool
Electrode Holder
