PB-1000 PANEL BEATER
TM
PRODUCT MANUAL
PAGE 3
Prior to opening and removing your Panel Beater™ it is important that you inspect the packaging for any
signs of damage.
If damage is observed, contact the delivery company and AIM before proceeding.
INSPECT PACKAGING:
For assistance or service call toll free
800-644-2730
(US and Canada)
SERVICE:
If you need assistance or service, first see the “Troubleshooting” section of this book. When calling – you will need your model and serial
number (found on the back the unit).
Model:
PB-1000
Model:
PB-1100 (Shipped from the factory without Battery)
Serial Number:
Purchase Date:
COMPONENTS:
Your AIM PANEL BEATER™ Dent Pulling Machine includes the following components:
A. Control handle and power lead
B. Power Switch
C. Electrode Holder (on handle)
D. Magnetic ground & 10’ lead
E. Puller Bar
Please check your package to make sure all parts listed above have been included with your
machine.
Call 800-644-2730 immediately upon receiving your Panel Beater if you have any questions.
F. Battery (PB-1000)
G. Battery Charger
H. Automatic Timer Control
I. Pack of 5 Electrodes & Lock Nuts
