6
FCC & ICES INFORMATION
(U.S.A. and Canadian Models Only)
WARNING - This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry
Canada.These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense. Intentional or unintentional changes or modifications
not expressly approved by the party responsible for compliance shall not be made. Any
such changes or modifications could void the user's authority to operate the
equipment.
If necessary, the user should consult the dealer or an experienced radio/television
technician for corrective action.The user may find the following booklet prepared by
the Federal Communications Commission helpful: "How to Identify and Resolve Radio-
TV Interference Problems." This booklet is available from the U.S. Government Printing
Office,Washington, DC 20402, Stock No.004-000-00345-4.
WARNING: THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRON-
MENT, THIS PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH
CASE THE USER MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.
1. UNPACKING
Unpack carefully.This is an electromechanical device and should be handled
carefully. Check to ensure that the following items are included:
•
Integrated camera/housing unit
•
Hardware kit containing (2) 6-32 x 3/4 mounting screws
If an item appears to have been damaged in shipment, replace it properly in its
carton and notify the shipper. If any items are missing, notify Aigis Mechtronics.
The shipping carton is the safest container in which the unit may be
transported. Save it for possible future use.
2. SERVICE
If the unit ever needs repair service, the customer should contact Aigis
Mechtronics for return authorization and shipping instructions,
1-800-523-6500.
