FCC & ICES INFORMATION
(U.S.A. and Canadian Models Only)
WARNING - This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada.These limits
are designed to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the
interference at his own expense. Intentional or unintentional changes or modifications not
expressly approved by the party responsible for compliance shall not be made.Any such changes
or modifications could void the user's authority to operate the equipment.
If necessary, the user should consult the dealer or an experienced radio/television technician for
corrective action.The user may find the following booklet prepared by the Federal
Communications Commission helpful: "How to Identify and Resolve Radio-TV Interference
Problems." This booklet is available from the U.S. Government Printing Office,Washington, DC
20402, Stock No.004-000-00345-4.
1.
UNPACKING
Unpack carefully.This is an electromechanical device and should be handled
carefully. Check to ensure that the following items are included:
• Integrated camera/housing unit.
• Hardware kit: special Allen wrench.
• Desiccant Kit
• 2-position terminal block (non-UTP versions)
Model Designation
Compare the model designation printed on the unit’s label to the list below
before reviewing these instructions.
MLA2CH211
Color, Hi-Res, Camera, 2.8-11mm AI IR lens, 24VAC
MLA2WD211
Wide Dynamic Range Camera, 2.8-11mm AI IR lens, 24VAC
MLA2DN211
True Day/Night Camera, 2.8-11mm AI IR lens, 24VAC
-U
Part numbers ending in –U: the BNC and Power leads are
replaced with a UTP board and RJ45 jack. Refer to Section
5.1.2 for more information.
2.
SERVICE
If the unit needs repair service or parts, the customer should contact
Aigis for authorization to return as well as shipping instructions.
6
Warning:
This is a Class A product. In a domestic environment, this
product may cause radio interference in which case the user may be
required to take adequate measures.
