15
5.6 Internal Monitor Controls
Note:
It is recommended to use the Remote Control to set up the unit.
See section
5.5.1 through 5.5.4
for set up using the remote control
.
If the Remote Control is not available do the following to set up the
PVD20.
1.
If the unit is not already powered, press the power button on the monitor
control panel. See
Figure 5
for exact location.
2.
Make any needed adjustments to the monitor from the menu button.
See
Figure 5
for exact location and uses.
5.7 Flash Memory Set Up
5.7.1 Activate the flash memory card.
1. If the unit is supplied with a flash memory device it will be wired into the
AUX Video Input. Insert a SD memory card with a base line JPG image in
its root directory to activate the image on the card.The unit will
automatically display the JPG image when AUX is selected for display.
2. If more than one JPG is on the card, the PVD20 will display a slide show
rotating through all supplied JPG images.
3. Some units may be supplied with a JPG remote control which will allow
additional features to be controlled. Use this remote and follow the on
screen display, for set up.
Menu
: Use this button to call
up the menu on the monitor.
Use the select, scroll down and
scroll up to navigate within the
menu. Make adjustments to the
monitor from the menu.
Select
item from menu
Scroll
Down
the menu
Not Used
Not Used
Scroll
Up
the menu
Power LED
Display Light:
Green Light indicates Video On
Amber Light indicates Video Loss
RCA Jack
Power On
and
Off
Button. Use this button
to power on the unit for
use.
Figure 5: Monitor Controls
