1.
UNPACKING
Unpack carefully.This is an electromechanical device and should be handled
carefully. Remove all of the items from the box. It is recommended that you do
not remove the clear protective plastic covers on the PVD20 at this time.
Check to ensure that the following items are included:
•
PVD20: LCD Monitor
•
Remote Control with 2 AAA Batteries (remote is located in a pocket in
the foam padding)
Note: Set aside the remote for later use.
2.
SERVICE
If the unit needs repair service or parts contact Aigis Mechtronics for
authorization to return as well as shipping instructions.
3.
DESCRIPTION
The PVD20 Series consists of a 20.1” LCD Monitor with a high resolution
color camera or a wide dynamic range camera.
Construction/Finish:
Fabricated aluminum case.
8
4.
INSTALLATION
Attention: Installations should be performed by qualified service
personnel only in accordance with the National Electrical Code or
applicable local codes.
4.1 Mounting
The PVD20 is available in a variety of mount configurations. For specific
directions on mounting the PVD20 unit see the Instruction Book that came
with your mount. Once the PVD20 is mounted, the installation procedure may
continue.
4.2 Power and Video Connections
Attach the 2 24VAC power connections to your transformer/power supply. If
you have an external video source you would like to use as your auxiliary
source, connect it to the cable “Video In”.
4.3 IP Connection
4.3.1 Connecting the RJ-45 IP Connection
Located on the back of the PVD20 is the RJ-45 Ethernet connection. See
Figure 1
for location. Use this to access the CCTV video from the PVD20
over the network.
