18
5.9.2 Dip Switch Location for Wide Dynamic Range (WDR) Camera
See Detail B
Note:
is factory set up
DETAIL C
The following diagram shows the selectable dip switches for the Wide
Dynamic Range (WDR) Camera:
WDR
ON
ON
1
2
WDR
Figure 9: Dip Switch Location:
Wide Dynamic Range (WDR) Camera
5.10 Focusing the Camera
Adjust the focus on the camera by adjusting the rings around the lens until the
picture is sharp and clear. If the camera is going to be angled to one side or
another, there is a sliding black mask behind the front “window” with a hole for
the camera. Adjust the camera to the proper tilt position, see
Figures 6
or
7
for your camera series, and then slide the black mask until none of it shows in
the picture.
