Usage and Maintenance Instructions
Ver.1 01/2013 (2545)
2
INTRODUCTION
Thank you for deciding to purchase the Plastic Bath Step. The Plastic Bath Step is
manufactured from the finest materials and components available, when used correctly it is
designed to give many years of reliable trouble-free service.
NB. Do not exceed the weight limit stated – doing so could put the user at risk.
NB. Weight limit: 120 kg (18.5 stone)
BEFORE USE
•
Carefully remove all packaging. Avoid using any knives or other sharp instruments
as this may damage the surface of the product.
•
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product as it may compromise your safety, but contact your
supplier for support.
•
As with all devices designed to assist the elderly or disabled, care should be taken
to avoid sudden or undue movement, when using this equipment.
WARNINGS & USAGE
•
Ensure that the step is dry and free from soap or oil film.
•
Ensure that the back of the step is positioned against a solid upright surface to
prevent the step from moving forward.
•
Step centrally on the step with both feet.
•
Test for stability.
•
DO NOT step onto the edge of the step; this may cause it to tip. Always step onto
the middle of the step top and ensure that your weight is evenly distributed.
•
DO NOT jump onto or off the step.
•
Use the step only when dry to reduce the risk of slipping and ensure that the
surface beneath the step is dry before use.
•
NB. This is not a toy; ensure that children are supervised at all times.
HEIGHT ADJUSTMENT & STACKING
Multiple Bath Steps may be used together to increase the height overall, by simply stacking
two or three Bath Steps one on top of the other, ensuring that each step is fully pushed
down onto the step below.
