Aidan & Eva Hazelbaker FingerFeeder, Инструкции и сборка

Страница: 5 / 8

Insert the Disc/Membrane assembly into the large
opening of the Bulb, with the Membrane side inside the
Bulb. Align the small tab on the Disc/Membrane assembly
within the slot on the inside of the large opening of the
Bulb.
Assembly Instructions Cont.
6.
The temperature of the supplement should be between room and body temperature before pouring the
Bulb. This will allow the supplement to flow more freely through the Tubing. To warm cold breast milk, place
in container in a bath of lukewarm water. Never microwave or boil breast milk.
Place the Bulb in the palm of the hand. Position the
Tubing-to-Bulb junction between the Tubing Clamp and
the palm of the hand. This will allow less air to get into
the tubing and the baby. 7.
Place Tubing along the palm side of your finger. Position
the end of the Tubing even with the end of your finger. To
prevent tape from getting into the baby’s mouth, secure
the Tubing to your finger by taping it between the 1st and
2nd knuckle from your palm. This will ensure baby does
not take the tape into its mouth. 8.
Release the Tubing from the Tubing Clamp and prime the
system by gently squeezing on the Bulb. This will cause
the Tubing to fill with supplement and prevent baby from
swallowing air. 9.
Tubing Clamp Tubing
Tape
Tab
Slot
Finger Grip