Aidan & Eva Hazelbaker FingerFeeder, Инструкции и сборка

Страница: 4 / 8

Assembly Instructions
Wash your hands thoroughly in warm soapy water.
Healthcare professionals should wear a glove or finger
cot while feeding a baby with this device. (It may not be
necessary for baby’s parents to wear a glove or cot). 1.
Insert the Tubing Clamp into the recess on the Tubing
end of the Bulb. The slit in the Tubing Clamp should be
positioned so the Tubing may be gently pulled up straight
through the slit. Avoid pulling with too much force to
prevent damaging tubing. 2.
Gently pull the Tubing into the slit of the Tubing Clamp to
prevent milk flow. 3.
From the side of the Disc opposite the Finger Grip, push
the stem of the White Membrane all the way through the
small opening until the White Membrane is flush with the
Disc. 4.
Hold the Bulb in a vertical position with the large
opening facing upward. Fill the Bulb with the amount of
supplement the baby needs.
Do not fill the Bulb past
the 60 ml mark.
5.
Disc