VISCA over IP
15
The AIDA PTZ's use VISCA over IP protocol to reliably send
and receive information from IP controllers.
Communication port specs:
•
Control port: RJ-45 Gigabit LAN
•
IP Protocol:IPv4
•
Transmit Protocol: UDP
•
IP address: Default 192.168.1.188 (Check OSD Menu)
•
Port address:52381
•
Confirm send/transmission control: Depends
on software
What is VISCA over IP?
VISCA commands are the communication between the controller and the camera. These commands
are sent via UDP on the network. Since UDP transmission isn't that stable, a couple of steps must
happen before a movement is executed. The controller first sends out a VISCA command. The camera
equipment then receives the VISCA command and returns that message back to the controller. 0ncethe
commands are executed, the action will follow suit and the message will be complete. Each VISCA
command controls its own setting, so there are no overlaps in existing commands.
