OSD MENU
8
1. When the camera is on, press the MENU key on the IR remote controller to enter the OSD Menu.
2. After entering the main menu, use the UP/ Down navigate keys on the controller to select the main
menu. As you scroll through the menu,the selection will be highlighted in blue.
3. Press the RIGHT navigate key to enter the highlighted sub menu. Use the UP/DOWN navigate keys to
select within the sub menu. Use the LEFT/RIGHT navigate keys to enable or disable
parameters.
4. To return to the previous menu, you need to press return in the sub menu or MENU on the remote.
To fully leave the menu, press the MENU key again.
5. OSD Menu Setting List:
PTZF
FOCUS MODE
AUTO/MANUAL: Ability to change from auto or manual focus
DEFAULT: AUTO
DIGITAL ZOOM
ON/OFF: Ability to digitally zoom 2X. (PTZ-X12-IP | PTZ-NDI-X12 only)
DEFAULT: OFF
RATIO DISPLAY
ON/OFF: Grants display of the zoom X module. Off by default.
DEFAULT: OFF
ZOOM SPEED
Zoom speed control IR remote: 7 changeable levels.
DEFAULT: 5
SPEED BY ZOOM
When zoomed into the max, the camera will slowly tilt
DEFAULT: ON
PAN/TILT SPEED
Pan/Tilt speed control by IR remote. Controllable at different levels
DEFAULT: 18
RETURN
Return to previous menu.
EXPOSURE MODE
AUTO/MANUAL/BRIGHT/SHUTTER/IRIS: Choose the current Exp. Mode
DEFAULT: AUTO
EXPOSURE
SHUTTER
Set shutter speed. 1/30-1/10000: Allows for tuning of the shutter speed
DEFAULT: AUTO
IRIS
Set Iris: CLOSE-F1.8: Allows for tuning of the Iris opening.
DEFAULT: AUTO
GAIN
Set gain: 0dB-28dB: Allows for tuning the gain of the camera
DEFAULT: AUTO
BRIGHTNESS
Set brightness: 0-15: Allows for tuning the brightness of the camera
DEFAULT: AUTO
FLICK
Allows for adjustment of the flickerless options on the camera
DEFAULT: 50Hz
BLACKLIGHT
Allows for the enabling of the blacklight or not.
DEFAULT: OFF
GAMMA
Allows setting changes for the Gamma option of the camera
DEFAULT: 0
RETURN
Return to previous menu
IMAGE
WB MODE
AUTO/INDOOR/OUTDOOR/PUSH/ATW/MANUAL/SODIUM
DEFAULT: ATW
BLUE
Set red gain level: 0-255 (Allows for precise tuning of the blue setting)
DEFAULT: AUTO
RED
Set blue gain level: 0-255 (Allows for precise tuning of the red setting)
DEFAULT: AUTO
DEFOG
Set defog level: This setting allows you to clear up the hazy images
DEFAULT: 0
MIRROR
ON/OFF: Makes the image flip on the vertical plane
DEFAULT: OFF
FLIP
ON/OFF: (optional) Makes the image flip on the horizontal plane
DEFAULT: OFF
COLOR/B&W
COLOR/B&W: Allows for B&W color mode
DEFAULT:
COLOR
GAIN LIMIT
Allows you to cap the gain at a certain level
DEFAULT: 15
RETURN
Return to previous menu
