- 5 -
- 6 -
3. Pull out the bag to the suitable
length you want– Fig.3
4. Put down the cutter rack and make sure it
is on the right place of the bags, then slide
the cutter from one end to the other end to
cut the bag– Fig.4
II. Vacuum packaging with a bag
Fig.3
7. Press “ Manual seal ” button to start
sealing the bags -Fig.7
8. Press the release button to open the cover
and take the bag out of the machine. The
bag is then done and is ready for vacuum
sealing -Fig.8
1. Put the items inside the bag. Use only the special designed vacuum bags supplied
by us with vacuum channels.
2. Clean and straighten the open end of the bag, make sure no dust, wrinkle or ripples.
3. Place the open end of the bag within the vacuum
chamber area. – Fig. 1
4. Put the cover down on both sides using both hands
until click sounds are heard on both sides- Fig.2
Fig.7
Fig.8
Fig.1
Fig.2
Fig.4
5. Put one end of the bag on top of the sealing
element into the bag fixture– Fig.5
6. Close the top cover and press tightly till you
hear it click in place on both sides– Fig.6
Fig.5
Fig.6
