DAC3060
20
Connecting the pneumatic system
An example of connecting a pneumatic system:
1.
Pneumatic compressor
2.
Filter / water extractor
3.
Pressure regulator
4.
Oil distributor
5.
Pneumatic hose
6.
Tool
Use an oil distributor in the pneumatic system in order to ensure the effectiveness and long
life span of the pneumatic appliance.
Only use oil that is suitable for pneumatic appliances
and check the oil quantity in the oil distributor daily. NOTE: When the pneumatic network’s
length exceeds 10 m the output of the oil distributor is not necessary enough to lubricate
the pneumatic appliances effectively enough. In this case, ensure sufficient lubrication
according to the point “lubrication”.
The pneumatic filter/water extractor must be used to remove liquid and dirt, to prevent
rust, damages and wear of the machine inner parts. The filter must be checked daily and
emptied when needed.
The machine, connectors and hoses must be protected against dirt. Coarse dust, sand etc.
can cause leaks and damage the machine and its connectors.
