AIC JBOD Series, Руководство пользователя

Страница: 22 / 105

13
Chapter 2. Hardware Setup J4060-02 User Manual

Loosen both sides of the front panel to release LED cover.

Hold the backplane module to pull the backplane module out of the chassis.

Slide the new HDD backplane module into JBOD and close the lever.

Cover JBOD with LED front board and screw both sides.
NOTE
Before you pull out the HDD backplane, please remove all HDD trays and expander
modules.
2�5 HDD Backplane Module

Disconnect all of the cables from the expander module.

Loosen the thumb screw to release the expander tray.

Pull the expander module out of chassis.

Align the new expander module with the expander slot and insert it into the chassis.

Secure the expander with the thumb screw.
2�6 Expander Module