manualshive.com logo in svg

AIC 12G SAS JBOD Series, Руководство пользователя

Поделиться
Скачать
AIC 12G SAS JBOD Series Скачать руководство пользователя страница 85

76

Chapter 4. BMC Configuration Settings

J4060-03 User Manual

If DHCP is disabled, specify a static IPv4 address, Subnet Mask and Default Gateway 
to be configured for the selected interface.
• An IP Address consists of 4 sets of numbers separated by dots as in 
“xxx.xxx.xxx.xxx”.
• Each set ranges from 0 to 255.
• The first Number must not be 0.

IPv6 Configuration

It lists the IPv6 configuration settings.

IPv6 Settings

Check this option to enable IPv6 support for the selected interface.

Obtain an IP address automatically

Enable ‘Use DHCP’ to dynamically configure the IPv4 address using Dynamic Host 
Configuration Protocol (DHCP).

IPv6 Address

Specify a static IPv6 address to be configured for the selected interface.

Subnet Prefix length

Specify the subnet prefix length for the IPv6 settings.
• Value ranges from 0 to 128.

Default Gateway

Specify the v6 default gateway for IPv6 settings.

Save

Click ‘Save’ to save any changes made. You will be prompted to log out of the current 
UI session and log back in at the new IP address.

Reset

Click ‘Reset’ to reset the modified changes.

Содержание 12G SAS JBOD Series

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды