AHT BABY POD 20 Скачать руководство пользователя страница 7

Страница: 7 / 24

Section 4

Environmental conditions

Environmental conditions may alter the use of Baby Pod 20 slightly. Read the following specific instructions for

more information.

•

DO NOT

leave Baby Pod 20 in direct sunlight or near other radiant heat sources. Outside radiant heat sources

may cause the baby to overheat.

•

DO NOT

use the TransWarmer Infant Transport Mattress in ambient termperatures greater than 28.0 degreees

celcius.

•

DO NOT

place a baby directly on the printed side of the TransWarmer mattress. An infant should be placed on

TransWarmer’s soft, non-woven surface.

•

Secure Baby Pod 20 to a stretcher or gurney when possible.

•

Baby Pod 20 may be hand-carried if no stretcher or gurney is available (e.g. Search and Rescue recovery). If

Baby Pod 20 is to be used in the absence of a stretcher or gurney, attachone Side Strap to both Stretcher Fixing

Strap anchors on the same side of Baby Pod 20. Repeat for the other Side Strap. Pull Side Straps up above the

viewing area and hand-carry the device if necessary.

Section 4 - Environmental conditions

Warning

Содержание BABY POD 20

























Результаты поиска

Содержание BABY POD 20

Отзывы:

Бренды по названию

Популярные бренды

AHT BABY POD 20, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание BABY POD 20

Отзывы:

Бренды по названию

Популярные бренды