manualshive.com logo in svg

AHT BABY POD 20, Руководство по эксплуатации и техническому обслуживанию

Поделиться
Скачать
AHT BABY POD 20 Скачать руководство пользователя страница 16

16

© 2017 • Advanced Healthcare Technology Ltd. • Baby Pod 20 ®

Section 6

Operating Instructions cont...

Once the baby is properly positioned and the air removed from the Vacuum Mattress, position the baby into the 

Baby Pod 20 using the Infant Positioning Straps.

Making sure that the straps have been passed through its corresponding slot on the Vacuum Mattress, take one 

Infant Positioning Strap from the foot end of the Baby Pod 20 and the strap from the head end on the opposite 

side and cross them over the baby’s torso. Secure the straps together using the pre-stitched hook velcro tab.

Repeat this procedure with the corresponding head and foot straps on the opposite side. The two Infant 

Positioning Straps, when properly engaged, should form an “X” across the baby’s torso. Infant Positioning Straps 

should be snug across the baby’s torso, but not apply undue pressure. Improper use of the Infant Positioning 

Straps may cause injury to the patient during transport.

Section 6.6 - Securing baby inside Baby Pod 20

Warning

Patients may be harmed by the incorrect use of this device.

Warning

Each set of Infant Positioning Straps are 

SINGLE PATIENT USE ONLY

Содержание BABY POD 20

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды