AHS Antriebstechnik 6410, Примечание к применению

Страница: 5 / 8

www.ahs-antriebstechnik.de
Technische Änderungen vorbehalten / Specifications are subject to change without notice
AN-01-EN-6410-BA.doc Step motor drive TSP10-BA Page 5 of 13
TSP10
Adjustment
The setting of motor current, the step resolution and the current reduction is done at TSP10-BA
with two rotary switches (S1 = motor current, S2 = step resolution and current reduction).
This type of parameter setting is less complex and easier to handle than the setting with dip
switches and jumpers.
Description of the jumpers and DIP switch positions on the step motor drive 6410:
Pin 7
→ 
Pin 1

Position: open
Pin 8
→ 
Pin 2

Position: close
Motor current
Overview of the settings for the motor current for the two step motor drives
6410 TSP10-BA
Motor current
[A
rms
]
DIP6 DIP7 DIP8 Switch S1 Position
0,2 --- --- --- 0*
0,4 --- --- --- 1
0,625 open open open ---
0,7 --- --- --- 2
1,0 --- --- --- 3
1,25 open open close --
1,5 --- --- --- 4
1,875 open close open ---
2,0 --- --- --- 5
2,5 open close close 6
3,0
--- --- ---
7
3,125 close open open ---
3,5 --- --- --- 8
3,75 close open close ---
4,0 --- --- --- 9
4,375 close close open ---
4,5 --- --- --- A
5,0 close close close B
5,5
--- --- ---
C
6,0 --- --- --- D
6,5
--- --- ---
E
7,0
--- --- ---
F
*
Switch S1 to position 0 = factory set-up