www.ahs-antriebstechnik.de
Technische Änderungen vorbehalten /
Specifications are subject to change without notice
AN-01-EN-6410-BA.doc
Step motor drive TSP10-BA
Page 3 of 13
TSP10
Connection and adjustment
The design and signal assignment of the connectors for power supply and motor current are different to
6410, but the connectors will be deliverd together with our drive. The signal assignment is identical,
except for the additional logic supply. The logic supply can be connected to the motor connection.
Because of the B9/S25-serial adapter this applies also to the signal inputs / outputs.
6410
TSP10-BA
Supply voltage
Front side, 3-pole Series terminals
Bottom side, FKCT 2.5/4-ST
Motor connection
Front side, 5- pole Series terminals
Bottom side, FKCT 2.5/5-ST
Signal inputs/ outputs
Front side, Sub-D-socket 9p
Front side, Sub-D-Socket 9p (B9/S25-
Seriell-Adapter), 57259
Step resolution/ motor
current
Upper side,
DIP-switch 8p
Upper side,
2x Hex-rotary switch
Jumper
Inside the device
-
RS-232 Interface
-
Front side, Sub-D-Socket 9p
When using heat sink
Mounting with 4 screws
Mounting with 3 screws
Front side
Bottom side
Top side
