ahlmann AS90, Руководство по обслуживанию, Страница: 5 / 18

S05E/S06E 8-5
Maintenance 8
4 2 1 3 1
8.2.3 Checking the oil level in the hydraulic
oil reservoir
(1) Park the loader in a level position.
(2) Move the bucket to its lowest position.
(3) Tilt the quick-change device and move out the locking
bolts using the hand lever for the auxiliary hydraulics (4-9/5).
(4) Open the motor cover.
(5) Check the oil level in the sight glass.
NOTE
The oil level must be visible in the upper quarter of the sight
glass (8-7/arrow). If necessary, fill oil into the filler neck
(8-18/arrow).
8.2.4 Changing the engine oil
(1) Unscrew the maintenance flap from the motor protec-
tion (size 13) (8-8/arrow).
(2) Place a sufficiently large oil drain pan underneath the
motor oil sump.
(3) Open the motor cover.
(4) Unscrew the cover of the oil drain plug on the motor.
(5) Screw the drainage nozzle with hose from the tool box
(4-1/13) to the oil drain plug.
(6) Remove the cover cap from the hose.
(7) Further procedures are to be found in the Engine
Operating Manual.
8.2.5 Changing the oil in the axles
8.2.5.1 Rear axle of the »slow loader
» 20 km/h «
(1) Place a sufficiently large oil drain pan underneath the
axle.
(2) Unscrew the plugs from the axle arch (8-9/1, 8-9/2,
8-9/3 and 8-9/4) and the intermediate gear (8-10/1 and
8-10/2) and let the oil drain out.
CAUTION
Waste oil must be disposed of in such a way that it will not
cause pollution!
Figure 8-7
Figure 8-9
Figure 8-8