ahlmann AS 150, Руководство по эксплуатации

Страница: 78 / 113

S150/S151/S152/Z152 8-17
Maintenance 8
8.3.4 Swivel assembly (8-39/arrows)
The grease pack is designed to avoid friction, to seal the
unit and protect it from corrosion. For this reason, the
bearings should be greased liberally every 10 operating
hours until grease emerges. When greasing the swivel
assembly rotate the loader arm in 20° steps. Ensure that
all four grease points are greased at every step. Additionally
grease the assembly before and after longer periods of
inactivity.
DANGER
- Before greasing, mechanically prop up the
bucket arm [e.g. by inserting the bucket arm
support (option) (1-1/arrow)], apply the parking
brake (4-7/4) and set the drive direction switch
(4-7/3) to “0“.
- Makes sure that nobody is in the working
area of the loader arm while rotating the arm.
8.3.5 Loader assembly
ATTENTION
The bolts/greasing points (8-40/arrows of the
loader/quick coupler assembly) must be greased
every 10 operating hours .
8.3.6 Driver cab doors (8-41/arrows)
ATTENTION
Ensure that the hinges of the driver cab doors are
greased every 50 operating hours .
NOTE
Ensure that the hinges on both driver cab doors
are greased.
Fig. 8-39
Fig. 8-40
Fig. 8-41
i