ahlmann AS 150, Руководство по эксплуатации

Страница: 58 / 113

S150/S151/S152/Z152 7-5
Rescue, Towing, 7
Lashing, Crane-Lifting
DANGER
- In case of engine failure considerably more
force is required to steer the vehicle.
- Tow the vehicle at slow speed (2 km/h).
- For longer towing distances, the defective
vehicle should be loaded (see 7-2/1 and 7-2/2,
7-3/1 and 7-3/2) for lashing points.
- The max. permissible load of the front towing
and shunting coupling (7-2/1) is 8.0 t
horizontally and axially.
- The max. permissible load of the rear towing
and shunting coupling (7-3/1) is 8.0 t
horizontally and axially.
- The max. permissible load of the lashing
points/ loading points (7-2/2, and 7-3/2) is
x t assuming an angle of 45°.
- Note maximum height restrictions!
7.1.1.2 Towing the swing loader in case of
transmission failure
(1) Press the rocker switch for the hazard warning lights
(4-8/11).
(2) Chock both front wheels in both directions to prevent
the vehicle from to ensure that the vehicle does not roll.
(3) Put the gear selector (4-7/3) in neutral (position "0").
NOTES
Preparatory tasks (4), (6), (7), and (10) are only
required if the rescue area is not in a publicly
accessible area:
(4) Align the wheels on the front axle and then use the
steering selector lever (4-6/4) to set the steering mode to
"rear-wheel-steering".
(5) Apply the bucket protector to protect the lip and teeth
of the bucket (5-4/arrow).
(6) Insert the bucket protector plug in the socket (5-5/
arrow).
(7) Lift and mechanically prop up bucket arm [e.g. by
inserting the bucket arm support (option) (1-1/arrow)] and
lower bucket arm until it rests on the bucket arm support.
(8) Close both stop valves (1-2/1 and 1-2/2).
(9) Block the swivel mechanism by inserting the blocking
wedge (1-3/arrow) in the swivel blocking mechanism
(1-4/arrow).
(10) Attach the towing rod to the loader to be towed
[(7-2/1 - for towing forwards) or (7-4/1 - for towing back-
wards)] and to the towing vehicle.
ATTENTION
If the loader does not have a forward shunting and
towing coupling, the loader can only be towed
backwards.
(11) Switch off the engine.
(12) Release the parking brake (4-7/4).
i