Ahlborn ALMEMO 2690-8A, Руководство по эксплуатации

Страница: 27 / 88

27
10.
MEASURING USING MEASURING-MENUS
After the first switch-on, the device shows the
menu
Meas. points list (s. 10.5.3). It offers a
good overall view over the whole measuring sys-
tem. This is also where to control, if time and
date are right. If not, there is the possibility to pro-
gramm them immediately (s. 9.4 and 9.5). Addi-
tionally, you can already see continuously the
measured values of all connected sensors and
measuring channels. It is even possible to assign
extra additional functions like comment, range,
max values and limits with the cursor keys

or

. If you programm the cycle timer (s.
10.3.2) you can start the first measure-
ment with the key
<START>
and cyclically record the measured values. If a ter-
minal is connected, all values are also put out online. After selecting the chan-
nels, it is also possible to programm measuring points. To select other measur-
ing menus, press key
<ESC>
.
Menu selection
The data logger 2690-8 provides a series of pre-
fabricated measuring menus for a best possible
display of the measured values and correspond-
ing function values. They are called up in the se-
lection MEASURING-Menus and differ in the
number of measuring points (1 to 20), in the dis-
play of measured values in different sizes of the
digits (4, 8, 12 mm) or as bar or line chart and in
the arrangement of functions. If this does not
come up to your expectations you can arrange
the 3 user menus U1 to U3 yourself from over 50
functions (s. 10.7).
Call up the menu selection with key:
<ESC>
Select a menu with keys: 
or

...
Call up the selected menu with key:

The most important functions for controlling the measuring operation are already
available in the measuring menus and can be programmed there directly.
For a special programming of the sensors or the device, there are extra
PRO-
GRAMMINIG -Menus
and for special functions
ASSISTANT-Menus
.
They are selected with the keys:
<MENU1>
or
<MENU2>
.
C © REC COM l© ©l R01 * ´´´´´´µµµµ¶
±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±
Meas.points list: Comment
Time: 12:34:56 Date:01.01.04
Cycle-timer: 00:00:30 nS
00: 23.12 °C Temperatur
01: 11.37 mls Velocity
02: 123.4 mV U2.4
10: 53.6 %H r.Humidity
20: 15.2 °C Dew point
30: 11.2 glk a.Humidity
START MANU F PRINT ESC
* ALMEMO 2690-8 *
±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±
MEASURING-Menus:
Standard display ©
U1 Meas. value correction
U2 Averaging
U3 Volume flow
Data logger
Multi channel display
*List of measuring points
Bar charts
Line diagram
_____________________
Menu1 PROGRAMMING-Menus
Menu2 ASSISTANT-Menus
POFF *ON F MENU1 MENU2